BVRLA Guidelines:

Paintwork, body, bumpers and trim

There should be no rust or corrosion on any painted area including painted bumpers, body moulding and mirrors. Obvious evidence of poor repair is not acceptable.

Chips

Small areas of chipping, including door edge chipping, are acceptable relative to the vehicle’s age and mileage. If the areas of chipping require the entire panel to be re-painted, the damage is not acceptable.

Dents

Dents (up to 10mm) are acceptable provided there are no more than two (2) per panel and the paint surface is not broken. Dents on the roof are not acceptable.

Scratches

Scratches and abrasions (up to 25mm) are acceptable, relative to the vehicle’s age and mileage, and provided the primer or bare metal is not showing

Moulding, wheel arch trims

Scuffs and scratches are acceptable provided the moulding or trim is not broken, cracked or deformed.

Badges and labels

Badges, labels or advertising fitted to the bodywork or glass of the vehicle should be removed unless originally fitted with the agreement of the leasing company and any damage caused by their attachment or removal must be made good. Any difference in paintwork colour noted following the removal of advertising, labelling or logos is not acceptable.

Soft top convertibles Convertible

roofs must be fully operative and free from rips and tears. The rear window must not be cracked or creased. Accessories originally supplied, e.g. tonneau cover, must be present and in good condition.

Tow bars

A tow bar, if fitted, must be in good, rust-free condition with electrical connections working properly. A ball cover must be in place.

Windows, glass, door mirrors and lights

Windows/windscreens

Light scratching is acceptable provided it does not interfere with the driver’s line of sight and any heating elements still work properly. Chips, cracks or holes are not acceptable

Door mirrors

Missing, cracked or damaged door mirrors are not acceptable. If adjustable and/or heated door mirrors, they must work correctly

Lights and lenses

All lights must work. Minor scuff marks or scratches are acceptable. Holes or cracks in the glass or plastic covers of lamp units are not acceptable.

Tyres and wheels

Tyre wear and damage

All tyres, including the spare, must meet minimum UK legal requirements and comply with the vehicle manufacturer’s recommendations of tyre type, size and speed rating for the vehicle. There must be no damage to sidewalls or tread.

Wheels and wheel trims

Dents and holes on steel rims and the main body of the wheel, are not acceptable. Scuffs up to 25mm on the outside edge of wheel trims and on alloy wheels are acceptable. The spare wheel, (including ‘spacesaver’) jack and other tools (including emergency tyre inflation canister) must be intact, stowed properly and in good working order.